1993 Pierce Dash 1500/500 (E2592)

General

Engine – Detroit DDEC 350 HP Diesel
Transmission – Allison HT740 Fuel- Diesel
Brakes – The service brake system is full air type. Front brakes are 16.50″ x 6.00″, cam operated, with manual slack adjusters and 16.50″ x 7.00″ Cam operated at the rear with manual slack adjusters.
30 square inch front brake chambers.
30 square inch rear brake chambers.
Hydraulic ladder rack
$20 000 each truck

Pump

Pump – Wateous CSUY 1500 GPM
Discharges, Driver side 2 – 2 1/2″
Officer side – 1 – 2 1/2″, 1 – 4″
Rear – 2 – 2 1/2″
Suction, Driver side – 1 – 6″ inlet
Officer side 1 – 6″ inlet
Front – 1 – 6″ inlet
Cross lays 2 – 1 3/4″
Piped for deck gun

Electrical

Dynamote Generac Inverter
Telescoping lights – 2

Dimensions

35,448 and 31,786 miles on the vehicles
Front axle – Reverse Elliot “I” beam type with inclined king pins. Rockwell Standard Model axle FL-941 with a rated capacity (tire) of 16,540 pounds. The turning angle is 40 degrees.
Rear axle – Rockwell RS-24-160 with capacity of 24,000 pounds. Single reduction differential has a 4.10 to 1 ratio. Top speed governed at 62 mph.
Length – 28′ 10 1/2″,
Height 9′ 4″
Wheelbase – 169″
GVWR 40,540

Fenton Fire Equipment Inc. is not the owner of the aforementioned Vehicle and or equipment. As such we are unable to guarantee the accuracy of the information provided above. Before purchasing any equipment, it is imperative that you confirm with the vendors that the equipment in question meets your required needs. Fenton Fire Equipment Inc. is not responsible for the condition of any of the vehicles and/or equipment listed on our site. We recommend a third-party inspection of the vehicle and/or equipment be performed prior to purchase.