2000 Pierce Dash 75′ Ladder Quint 1250/500 (Q1285)

General

Pierce Dash 2000 with seating for six (6) personnel
DDC Series 60 engine: 430 HP @ 1550 lb/ft torque
Jacobs engine brake
Wabco ABS
Allison HD4060P transmission with “4+1” mode
75 gallon fuel tank
22” front bumper extension with two (2) hose trays
Air ride driver’s seat / Five (5) SCBA seats
Air conditioning with roof mounted condenser and front / rear units
Pierce Command Zone chassis electrical system
290 Amp Niehoff Alternator
75A battery charger / auxiliary 12V power supply

Pierce aluminum tandem axle quint body
Hosebed capacity for up to 1000’ of 5” LDH with one (1) hosebed divider
Spacious body compartments with hinged doors
Driver/passenger rear equipment mounting decks
Two (2) 500 lb. roll out trays
Hard suction hose troughs (w/ hose)
SCBA cylinder compartments (6) at wheelwells
Complete ground ladder compliment, to include:
1 x 35’ 3-section
1 x 24’ 2-section
1 x 16’ roof
1 x 20’ roof
1 x 14’ Fresno combination
1 x 10’ attic ladder
16’ ladder mounted on aerial base section
Six (6) pike pole tubes

Pump & Tank

1250 gpm Q-Flo pump with 6” intakes
500 gallon UPF Poly IIE water tank

6” front suction with air operated balbe
Air pump shift with manual override
Hale TPM pressure master (TPM) system
Hale thermal relief valve (TRV)
Hale ESP (oil free) primer
Hale MIV-E at PS 6” inlet
2 ½” gated inlet at DS
100% Akron valves
2 x 2 ½ “outlets at DS
1 x 2 ½” outlets at PS
1 x 3” LDH outlet at PS
1 ½” front bumper outlet (2” plumbing) with swivel and stops
4” outlet from pump to aerial waterway
2 x 1 ¾” crosslays (single stack)
1 x 2 ½” deadlay (single stack)
Class 1 ¼” turn bleeder valves
Fully removable PS pump panel
“Primer Engaged” light at pump panel
Full width pull out platform at pump operator’s panel
No Shock gauges

Generator & Electrical

12V Electrical / Warning
Perimeter scene lights at both pup panels and rear steps
Air horns (2) with foot switch controls
Code 3 halogen electronic sire with CP recessed speaker
Federl Q2B siren on front bumper
“Steps Not Stowed” light in cab

120V Electrical
AMPS 6kW hydraulic/PTO generator
Remote starts in can and at pump panel
Complete circuit breaker panel
Extenda-light telescoping tripod lights at rear of cab (2)
LED aerial tip lights
Hannay electrical cable reel in area above pump
200’ 10/3 cable with J-box
20A receptacles at tripod lights and at rear

Aerial

Pierce / HL75
Pierce 75’ heavy duty 3-section ladder
Collins FX-12 aerial tracking lights
28 aerial electrical collector rings
120V receptacle at aerial tip
Atkinson 2-way (tip to turntable) intercom
Aerial tip “creeper” controls
1000 GPM aerial waterway with 5” rear inlet
Semi-retractable “Pinnable” waterway
Aerial and ground ladder testing

Equipment

2 x 6” x 10’ suction sleeves
200’ 10/3 cable
4 outlet junction box and holder
Axe and pike pole at aerial tip
Firecom headsets
UPF Poly-Tank certified capacity (gallons) – 528
LED warning lights
Roto-Ray

Dimensions

Mileage: 35,000 (In Service)
223” wheelbase
60,800 lb. GVWR