Home » Equipment » Used Engines and Pumpers » 1985 Sutphen Deluge Pumper 1500/1000 (E4897)
R side

Inventory #: E4897

PRICE: $19,000.00

AVAILABILITY: Available

1985 Sutphen Deluge Pumper 1500/1000 (E4897)

Loads of great work done on this truck, scroll down for a full list of upgrades!

General

1985 Sutphen Deluge
Detroit 8V71TA Turbocharged 370hp
Diesel
Automatic
Total Seating: 5
SCBA Equipped Seating: 3

Fully Equipped, see photos.

Pump & Tank

1500 Hale QSMG
1000 Gallon Custom Fiberglass
Pump Hours: 531
Recent Pump Certification

Generator

Hale 5000 Watt
Reels: 1

Dimensions

Miles: 31,378
Engine Hours: 2,238
GVW Front: 13,500# FF942
GVW Rear: 24,000# R170

1985 Sutphen HS1925
Upgrades to the Chassis

1. New fluids and filters throughout; oil, trans, rear axle, pump transmission and air compressor
2. Rebuilt Allison HT 740 transmission by Allison
3. New leaf springs front and rear
4. New Garbriel front shocks
5. New Goodyear 11R 22.5 tires and Alcoa aluminum wheels
6. New Delco 28SI Series High Output Alternator
7. New Spicer 1700 Universal Joints (4)
8. New Bendix AD-9 Air Dryer
9. New Bendix air compressor Governor
10. New Bendix brake treadle valve and hoses
11. New Bendix parking brake control
12. New Bendix relay valve
13. New Bendix proportioning valve
14. New Bendix low air switch
15. New Bendix pressure protection valve (4)
16. New air tank pull-chain drain valves (4)
17. New accelerator pedal assembly
18. New radiator and heater hoses
19. New heater control cable
20. New heater control valve
21. New NAPA spin-on coolant filter system
22. New Parker fuel lines
23. New Racor heated water fuel separator
24. New Aeroquip transmission lines
25. New Aeroquip turbocharger oil cooling line
26. New Parker power steering lines
27. New MGM brake chambers
28. New Meritor slack adjusters
29. New front brake hoses
30. New air brake valves throughout
31. New air horn switch/valve
32. New LED headlights/driving lights
33. New LED cab/hose bed spotlights
34. LED lights and bults throughout
35. New Hansen LED handrails (4 cab entrance), (4 rear step) and (2 hose bed)
36. New Cole Hersee battery switch
37. Added circuit breaker protection for battery charger receptacle
38. New Cole-Hersee compartment light switches
39. New soldered battery cable ends
40. Oak compartment floor deck refinished
41. LED ICC running lights
42. Whelen Liberty LED lightbar
a. Alley/Take Down/Traffic Advisor lights
43. Whelen 200 LED intersection lights
44. Whelen 200 LED Sutphen sequential lights
45. 2-CPI Speaker/LED Lights 100amp, bumper mounted
46. New driver’s seat cushion, new upholstery throughout
47. Reconditioned leather steering wheel
48. New Headlight Switch
49. New aluminum tailboard

Upgrades to the Pump
1. New Hale pump transmission bearings
2. New Cole Hersee Pump engaged switch
3. New Trident Air Primer
4. New Hale Relief Valve
5. New Hale Pump Anodes
6. New Class 1 liquid filled pressure gauges
7. New push-lock fittings on pressure and drain lines
8. All discharge valves rebuilt
9. All intake valves rebuilt
10. All drain valves disassembled and cleaned
11. Hale tank to pump valve rebuilt with a new ball
12. New Hale/Cole Hersee pump activation switch (pump transmission)
13. New fire pump drains, push lock fittings and hose
14. Rebuild Hale drain valves
15. Rebuilt Akron 6” butterfly intake valve
16. New MC tank level indicator and LED lights
17. LED pump panel light

Fenton Fire Equipment Inc. is not the owner of the aforementioned Vehicle and or equipment. As such we are unable to guarantee the accuracy of the information provided above. Before purchasing any equipment, it is imperative that you confirm with the vendors that the equipment in question meets your required needs. Fenton Fire Equipment Inc. is not responsible for the condition of any of the vehicles and/or equipment listed on our site. We recommend a third-party inspection of the vehicle and/or equipment be performed prior to purchase.